The RS210C cabinet features the same 2 x 10" + 1" Eminence driver configuration found in the award-winning RS210 cabinet.
Additionally, its open amp design
allows for you to choose between any of the three compact TC
Electronic amp heads: RH750 RH450 or Staccato'51. The amp of your
choice simply slides into the amp slot and is secured by a single
screw in a matter of seconds.
- Fully customizable with any RH head
- Pull-up Handle and Wheels
- Roadworthy Construction
Your Voice, Your Choice
We were not interested in doing a combo that limits you, so we decided on an innovative solution where you can just swap heads as you see fit.
This means that you can get any voicing you like by chosing between our range of RH bass heads. Want more than one? Easy-peasy, you simply switch heads by loosening a single screw in a matter of seconds.
This is a combo you'd wanna take everywhere so we've made sure you can! It features a pull-up handle and wheels for easy transportation.
Also, you can detach the trolley in seconds if you want to, no need for any tools whatsoever. You can leave the trolley on during gigs, but sometimes you may experience a slight rattle - that's why we made it dead easy to take it off.
Built for The Road
This combo is super roadworthy and features 18MM hardwearing plywood, super stackability and a breakout speaker connection to drive up to 2 additional TC cabinets.
When on the road, we bet you will enjoy the comfort of having a state-of-the-art head built in to your main cab, as well as the fact that you can wheel it around before and after gigs.
Vertical Stacking Explained
Vertical Stacking... It may sound like a term that was developed by our sales and marketing departments, but in reality Vertical Stacking was born in our bass development department. The concept emerged from years and years of bass playing. Yep, that's right! The guys developing TC bass gear are actually bass players themselves, and they know what it's like out there in the real world of bass.
If you ever play gigs at private parties or small to mid-sized venues, you probably decided to only bring one bass cab - typically one with a 4x10" speaker configuration.
If you place a 4 x10" cab on the floor the sound waves will bounce off the floor. While this is great for getting that fat low-end impact, the downside is that you can't hear the details of your playing. (Well, your knees can, but not your ears.)
One solution is to place the cab on a chair, a rack case or similar. Now, you can hear the mid and high frequencies much better, but the downside is lack of low-end presence. Since you elevated the cab, you lose the early reflections bouncing off the floor.
In other words, no matter what you do, using only one 4 x 10" cab means a compromise of sound quality.
As long as you use TC cabinets, most of our amps can actually handle 3 cabs simultaneously.
Obviously, it would become a very tall stack if you stacked 3 2x10" or 2x12" cabs vertically, in fact you may not be able to reach the amp...
But don't worry, due to the extra cab, it actually makes sense to stack them in the traditional, horizontal way if you hook up three cabs.
The solution to the problem is our unique Vertical Stacking concept. There is nothing wrong with using 4 10" speakers. In most situations, that is more than enough - the problem is that all 4 speakers are fitted inside a square box in a 2x2 configuration.
Our answer is a 4x1 speaker configuration using either two 2x10", 2x10"/2x12" or two 2x12" cabs. Whether you want 10 or 12" speakers or a combination, the point is that you stack the speakers vertically.
The early reflections add punch and low-end to your sound, but at the same time, you can hear every detail thanks to the fact that the top speaker is aligned with your ears.
No More Compromises. Issue Solved!
If weight and space is less of a concern, you can always go for the classic configuration of 8x10". Or how about 2x12" in the bottom, 4x10" in the middle and 2x10" on top? Obviously, such solutions will also give you all the benefits of vertical stacking using smaller cabs.
Just like early reflections are key to the Vertical Stacking concept, you can take advantage of the same phenomenon if you use either an RS212 or RS112 as the lower cabinet and an RS210 as the upper cabinet.
It's perfectly fine to align the front of each cabinet, but if you want to emphasize clarity and definition in a natural way (without adjusting the tone controls of the amp), try pushing the upper RS210 cab back a bit.
Now, you will get eary reflections of the upper cabinet coming your way, and even though it may sound like a minor adjustment, the difference is significant and you can control the amount of early reflections by how far you push back the RS210 cab.
With the vertical stack, I heard a clean, focused sound with a smooth middle and tight bottom. Everything lines up really neatly, and the head fits atop with grace and style.Check out the full review by Premier Guitar
The RS210 and RS212 8-ohm cabinets are optimized for vertical stacking. In this arrangement, you get the benefit of really hearing your tone as it sounds. The speakers handled everything we threw at them, and they stayed tight and focused with almost everything we threw at them. This is a rig for players seeking clean, punchy bass tone. It’s big, it’s rich, and it’s beautiful sounding.Check out the full review by Music Players
As expected, each of the cabinets has its own distinctive tone, and I tried any combination of the three. The RS210 offered surprising amounts of volume with no distortion, as did the RS212, while the larger Rs410 is above par compared to many other current manufacturers. My back as well as my ears love them.Check out the full review by Performing Musician (PDF)